About this infection

.bigdata files ransomware is because it will encrypt your files, making them unopenable. This kind of malware is more widely referred to as ransomware. There is a high possibility that the reason the contamination was able to get into your system is because you opened a spam email attachment or obtained something from suspicious sources. Continue reading to find out how infection may be avoided. A file-encrypting malware infection may lead to very serious consequences, so you must be aware of how you could prevent it from getting in. It may be especially surprising to find your files encrypted if you have never come across ransomware before, and you have no idea what type of threat it is. When you realize that files can’t be opened, you will see that you are asked to give cyber criminals a certain amount of money so as to get a decryptor to decrypt files. If you consider paying, we would like to warn you who you are dealing with, and they are not likely to keep their promise, even if they’re given the money. It is more possible that you’ll be ignored after you pay. You should also think about where the money would be going, it will probably support other malware. It should be said that there are malicious software researchers who help victims of ransomware to restore files, so you might get lucky. Research free decryption tool before even thinking about giving into the demands. For those with backup available, simply remove .bigdata files ransomware and then restore files from backup.

Download Removal Toolto remove .bigdata files ransomware

* WiperSoft scanner, available at this website, only works as a tool for virus detection. More data on WiperSoft. To have WiperSoft in its full capacity, to use removal functionality, it is necessary to acquire its full version. In case you want to uninstall WiperSoft, click here.

Ransomware spread methods

If you’re uncertain how the ransomware managed to slip in, it might have done it in a couple of ways. Ransomware commonly uses quite simple methods, but that is not to say that more elaborate ones will not be used as well. Sending spam emails and hosting their malware on download sites are what we refer to when we say simple, as there’s little skill required, therefore popular among low-level crooks. You very likely got infected when you opened an infected file attached to the email. Hackers add a contaminated file to an email that looks kind of valid, and send it to hundreds or even thousands of users, whose email addresses were sold by other cyber criminals. Typically, the email would not appear convincing to those who have experience in these matters, but if it’s your first time coming across it, it would not be that unexpected if you fell for it. Mistakes in the text and a weird sender address are one of the signs that you might be dealing with malware. We wouldn’t be surprised if company names like Amazon or eBay were used because people would lower their guard when dealing with a familiar sender. Even if you think you’re familiar with the sender, always check the email address to make sure it belongs to the company. A red flag should also be the greeting not having your name, or anywhere else in the email for that matter. Your name will definitely be known to a sender with whom you’ve had business before. As an example, if Amazon emails you, they will have automatically inserted the name you have supplied them with if you’re their customer.

In short, look into the sender and make sure they are who they say they are before you rush to open the attachment. You ought to also be careful to not interact with advertisements when on sites with a dubious reputation. If you do, you could end up with ransomware. Adverts shouldn’t always be relied on so avoiding them is what we would suggest, no matter how tempting it might look. Using untrustworthy web pages as download sources might also bring about an infection. If you’re commonly using torrents, at least make sure to read the comments made by other people before downloading one. It would not be very unusual for flaws in programs to be used for the infection to be able to slip in. And that is why it is so critical that you update your software. You just have to install the updates, which are released by software vendors when they become aware of the flaws.

What happened to your files

Ransomware normally starts the encoding process as soon as you launch it. Files targeted for encryption will be documents, media files (photos, video, music) and everything you think of as valuable. As soon as the data is located, the file-encrypting malware will lock them using a strong encryption algorithm. You’ll notice that the affected files now have an unknown file extension attached to them, which will help you identify encrypted files fast. The ransom note, which you should find soon after the ransomware is finished locking your files, will then demand that you pay a ransom to receive a decryptor. You might be asked a couple of thousands of dollars, or just $20, it all depends on the ransomware. While you are the one to choose whether you’ll pay or not, do consider the reasons why malicious software specialists don’t advise giving into the requests. Do not forget to also think about other file recovery options. Maybe a decryptor has been created by people trained in malware research. It is also possible copies of your files are stored somewhere by you, you may just not remember it. Your computer stores copies of your files, known as Shadow copies, and if the ransomware didn’t delete them, you can recover them via Shadow Explorer. If you do not want this happening again, we hope you have invested into reliable backup. If you had taken the time to backup your files, you ought to only restore them after you uninstall .bigdata files ransomware.

Ways to eliminate .bigdata files ransomware

Manual removal isn’t something we advise, just to be clear. If you make a mistake, your computer could be irreversibly harmed. It would be wiser to use an anti-malware software because everything would be done for you. Those programs are created to delete .bigdata files ransomware and similarly harmful infections, thus there should not be trouble. However, take into consideration that a malware elimination program will not help you restore your files, it’s not created to do that. Data recovery will need to be carried out by you.


Learn how to remove .bigdata files ransomware from your computer

Step 1. Delete .bigdata files ransomware via Safe Mode with Networking

a) Windows 7/Windows Vista/Windows XP

  1. Start → Shutdown → Restart. win7-restart .bigdata files ransomware Removal
  2. When it is restarting, start pressing F8 until Advanced Boot Options appear.
  3. Go down to Safe Mode with Networking. win7-safe-mode .bigdata files ransomware Removal
  4. Once your computer loads, open your browser and download anti-malware software.
  5. Use it to delete .bigdata files ransomware.

b) Windows 8/Windows 10

  1. Click the power button from the Start menu, hold the key Shift and press Restart. win10-restart .bigdata files ransomware Removal
  2. Access Troubleshoot, select Advanced options and press Startup settings. win-10-startup .bigdata files ransomware Removal
  3. Go down to Enable Safe Mode and press Restart. win10-safe-mode .bigdata files ransomware Removal
  4. Once your browser loads, open your browser and download anti-malware software.
  5. Use it to delete .bigdata files ransomware.

Step 2. Delete .bigdata files ransomware via System Restore

a) Windows 7/Windows Vista/Windows XP

  1. Start → Shutdown → Restart win7-restart .bigdata files ransomware Removal.
  2. When it is restarting, start pressing F8 until Advanced Boot Options appear.
  3. Go down to Safe Mode with Command Prompt. win7-safe-mode .bigdata files ransomware Removal
  4. In Command Prompt, enter cd restore and press Enter.
  5. Then type in rstrui.exe and press Enter. win7-command-prompt .bigdata files ransomware Removal
  6. In the System Restore window that appears, click Next, select restore point, and press Next again.
  7. Press Yes.

b) Windows 8/Windows 10

  1. Click the power button from the Start menu, hold the key Shift and press Restart. win10-restart .bigdata files ransomware Removal
  2. Access Troubleshoot, select Advanced options and press Command Prompt. win-10-startup .bigdata files ransomware Removal
  3. In Command Prompt, enter cd restore and press Enter.
  4. Then type in rstrui.exe and press Enter. win10-command-prompt .bigdata files ransomware Removal
  5. In the System Restore window that appears, click Next, select restore point, and press Next again.
  6. Press Yes.

Step 3. Recover your data

If ransomware has encrypted your files, it may be possible to recover them using one of the below mentioned methods. However, they will not always work, and the best way to ensure you do not lose your files is to have backup.

a) Method 1. Recover files via Data Recovery Pro

  1. Download Data Recovery Pro.
  2. Once it's installed, launch it and start a scan. data-recovery-pro .bigdata files ransomware Removal
  3. If the program is able to recover the files, you should be able to get them back. data-recovery-pro-scan .bigdata files ransomware Removal

b) Method 2. Recover files via Windows Previous Versions

If System Restore was enabled before you lost access to your files, you should be able to recover them via Windows Previous Versions.
  1. Find and right-click on the file you want to recover.
  2. Press Properties and then Previous Versions. win-previous-version .bigdata files ransomware Removal
  3. Select the version and press Restore.

c) Method 3. Recover files via Shadow Explorer

If the ransomware did not delete Shadow Copies of your files, you should be able to recover them via Shadow Explorer.
  1. Download Shadow Explorer from shadowexplorer.com.
  2. After you install it, open it.
  3. Select the disk with the encrypted files, choose a date.
  4. If folders that you want to recover appear, press Export. shadowexplorer .bigdata files ransomware Removal